|
| |
 CAL-100
Calibrator for Battery Charger-Analyzers
- The CAL-100 is an instrument designed to
verify the performance and to calibrate Battery Charger-Analyzers used on Nickel-Cadmium,
Lead-Acid and other types of batteries. It is principally designed for the Superseder line
of battery test instruments but it can also be applied to other types of chargers and
charger-analyzers.
- The instrument is basically a digital
Ammeter and Voltmeter that is connected between the charger under test and the battery. In
addition, it provides a low current adjustable voltage source to simulate the various
battery voltage cut-off points and a Temp-Plate simulator to test the battery overtemp
portion of the Superseder line of Charger-Analyzers.
- Two 3-1/2 digit LED meters provide the
simultaneous monitoring of voltage and current on the charger and battery under test. The
voltmeter can also be used independently by way of the two external meter lead jacks.
- Current and voltage measurement can be
performed through the external cables, fitted with a Battery Cable Plug and a Battery
Receptacle, or through the front panel binding posts, for other types of tests (at reduced
currents).
For specifications see VCM-100
back
to top
|
