JFM Engineering, Inc. - Miami, Florida, USA

 

 

T1
Battery Trickle charger
 (replaced by the new TCS-1)

T1-1.jpg (21384 bytes)

  • The T1 Trickle Charger is a low current, constant current/constant voltage charger
  • It can be used to trickle charge Nickel-Cadmium and Lead-Acid batteries.
  • Its primary use is to maintain the batteries at full charge while the batteries are in storage (to compensate for the battery self-discharge).
  • Adjustable float voltage and maximum charging current.
  • Usable on batteries from 5A-Hr to 70A-Hr without re-adjustment.
  • The T1 Trickle Charger can also be used as a full charger for batteries of up to 2.5A-hr (@ C/10).

 

SPECIFICATIONS

  1. INPUT: 115VAC (230VAC optional), 50-60Hz
  2. OUTPUT: 32V max (nominal), 250mA max (nominal.
  3. MODES
    CONSTANT CURRENT: adjustable, from 0 to 250mA.
    CONSTANT VOLTAGE: adjustable, from 11V to 31V.
  4. PROTECTION: Open circuit, short circuit and reverse polarity.
  5. AMBIENT:     +5oC to +35oC (contact factory extended temperature operation).
  6. PART NUMBER:    9891001001

Note: Specifications subject to change without notice

 

 
[Home] [Articles] [Batteries] [Brochures] [Contact us] [Credit card orders] [Español] [FAQs] [Gallery] [Links] [Manuals] [Parts] [Products] [Services]
[Technical Bulletins] [Technical Notes] [Trade-in] [Upgrades] [Who we are] 
Send mail to webmaster@jfmeng.com with questions or comments about this web site.
Copyright © 2012 JFM Engineering, Inc. --- Last modified: January 09, 2012